As an owner of a recreational vehicle, annual RV roof maintenance should be on top of your lists. This should relate to roof cleaning and care. Recreational vehicles would often come as factory standard in fiberglass, ethylene, TPO rubber, aluminum, and EPDM rubber. And while aluminum and fiberglass roofs are low maintenance, they can still increase the cost of your RV. Add a significant amount of weight to the vehicle. This will leave the EPDM roofs as the most standard to find in the industry. This is true to most lightweight and small RVs. Know that RV roof maintenance begins with learning to identify the kind of material on your roof.

How would you figure out the type of roof that you have? Find it in the owner’s manual. Still, this may seem not an option as always. Find it and state the material type. It could as well provide RV roof maintenance instructions. When the manual has lost to the time, do not worry as there is still hope.

Bear in mind that in every RV roof, and any material used, it requires RV roof maintenance. Below are the following steps that you might want to consider doing.

1. Inspection of the Roof. Look for possible cuts and weak in the RV roof. Degrade the sealants that need repair.
2. Preparation is the Key. The RV roof should be clear from dust, and debris. It must also be dry before finally starting to work on it.
3. Making Use of the Right Products. Use the right sealants, cleaners, and materials for the RV roof type that you have. This is also important in the TOP and EPDM.
4. Following the Direction on the Products Chosen to Use. Allow them to cure, and then set and dry and more.
5. Performing RV Roof Maintenance. Look over the skylights, vents, ladder, and AC unit. They can attract dirt, mold, and also get cracked. Never seal around the AC unit as it may only disrupt the condensation drainage system. And it will only push the water inside the RV.

TPO RV Roof or Rubber Roof

TPO roofs are comparable to the EPDM. It is just that they are shinier and smoother. They also are known for having a less porous finish that will not absorb the mold and dirt as the EPDM roofs. What more, the TPO roofs do not chalk by way of oxidizing. Thus, you won’t be needing the unsightly streaks. TPO tends to be less slippery when they get wet. That is why if you cannot keep the footing on the wet roof, you will more likely be dealing with the EPDM.

EPDM RV Roof or Rubber Roof

The maintenance for EPDM RV Roof or Rubber Roof is carried out every three to four months. This kind of roof is a rubberized layer that is followed to a tight and woven fabric. This is also often mistaken as a fiberglass material. So, know which type of RV roof do you have.

The original state of EPDM is a bit dark in color. The carbonate, calcium, titanium dioxide, and zinc added to the formula for the roof can give it a distinctive white color. As to the white color, it will not only give the RV such a cohesive appearance. It might also create a reflective barrier to keep the RV cooler on humid and hot days. What’s good about the EPDM is that it has a different method for the protection of elements. This can oxidize into chalk later on. The manufacturers make use of EPDM material that sheds about 1/10 of the thickness every ten years. No need to worry about as this can cause unsightly streaks on the side of the RV.

When you know already have an EPDM roof, you will now need to practice RV roof maintenance. This will ensure that the roof stays on its top shape. When you will park and drive your RV, you need to be extra careful of the low hanging branches that might only damage the delicate roof. The EPDM is also porous as it collects dirt and is also prone to chalking.

Perform RV roof maintenance for EPDM roofs every three to four months. The purpose of which is to wipe away debris, dirt, and other accumulating molds. The molds will start to grow on the EPDM roof. The mold won’t penetrate the EPM completely. But both dirt and mold could cause visual stains that can last eventually. But, they won’t affect the performance of the roof. Mold can grow on the RV’s in warmer climates that are not susceptible to mold. This is also due to the rubberized material of the roof reflecting the heat of the sun and enabling the mold to grow.

Reduce the chances of stains getting out of the ladder. Make use of a non-abrasive cleanser and a soft-bristled brush. Avoid any of the petroleum-based products and all other cleansers when you go clean the EPDM roof. There are so far popular RV roof maintenance products for the condition and cleaning of the EPDM RV roof. Follow it up by the use of the sealant on any of the problem areas found during the inspection.

Fiberglass Type and Aluminum-Type RV Roof Maintenance

The fiberglass type and aluminum-type of RV roof maintenance would have the same for both. They can be so easy for you to take good care of as compared to the rubber roof. Still, they have their set of drawbacks with weight and expense. They will also demand a gentle form of cleaning from one time to another using specialized cleaner. Also, inspect the roof regularly and seal or repair the openings or connections to almost anything breaking up the roof. These include the vents and the ladders. Make use of a self-leveling sealant.

Feel free to visit our site since we have a wide range of RV roof maintenance products for all roof types like fiberglass, aluminum, and rubber.